M1-18R MEDIUM COMBO
Eminence GB128
18 Watts Clean
40+ Watts Rock



 
Sale price: $1399

M1-18R SMALL RETRO COMBO
Eminence GB128
18 Watts Clean
40+ Watts Rock



 
Sale Price: $1299

M1-18R LARGE COMBO Eminence GB128
18 Watts Clean
40+ Watts Rock
 M3-7R HEAD
BLACK



Sale Price: $899


 
M3-7R HEAD
BLUE



Sale Price: $949


  
 M3-7R HEAD
UNAGI RUSSERT



Sale Price: $949


 
 M3-7R HEAD
WILD CROC BRONZE



Sale Price: $949



M3-7R HEAD
BURGANDY SNAKESKIN


          
Sale Price: $949


 
M3-7R HEAD
BENGAL TIGER



 
Sale Price: $949


 

M3-7R 1 X 12 LARGE COMBO
CELESTION GREENBACK
 VANILLA

          
Sale Price: $1249

M3-7R 1 X 12 LARGE COMBO
CELESTION GREENBACK
WESTERN BROWN


Sale Price: $1249

M3-7R 1 X 12 LARGE COMBO
CELESTION GREENBACK BURGANDY SNAKESKIN

          
Sale Price: $1249

M3-7R 1 X 12 LARGE COMBO
CELESTION GREENBACK
RED

           
Sale Price: $1249

 
M3-7R 1 X 12 LARGE COMBO
CELESTION GREENBACK
VINTAGE TWEED

           
Sale Price: $1249

M3-7R 1 X 12 LARGE COMBO
CELESTION GREENBACK
BLACK

           
Sale Price: $1199
 

M3-7R 1 X 12 LIGHT WEIGHT RETRO COMBO CELESTION GREENBACK
 
           
Sale Price: $899

M3-7R 1 X 12 LIGHT WEIGHT COMBO CELESTION GREENBACK

           
Sale
Price: $899

 

 


  • M1-18R SPECS
    • Push-Pull 18 watts peak clean, 40 plus watts peak dirty.
    • Cathode biased: uses proprietary “phase invariant cathode biasing” which reduces resistor/capacitor cathode biasing phase distortion.
    • Power tubes: 2 X EL84
    • Pre-amp tubes: 2 X12AX7
    • Controls: gain, master volume, treble, bass, reverb
    • Input: ¼ mono
    • Output: ¼ mono – plug into one of three outputs 4, 8, and 16 ohm
    • Reverb on/off 1/4 mono - external switch pedal to turn on or off the reverb
    • Built in power conditioning: proprietary “trans flux power module” which enables the above specifications to be valid for the following input profile: 117vrms +/15%,48 Hz to 1 KHz or from 100VDC to 200VDC. Specifications shall not change over the specified input voltage/frequency range. Ideal for those “out of the way” gigs.
    • Very low noise: better than 65 db. Studio/stage quality ideal for miking or recording. 120 Hz amp hum is gone. Note: guitar and pedal hum is a separate issue.
    • 1x12 combo / 1X12 extension speaker: Eminence GB128 
    • Warranty: One year parts and labor excluding two way shipping, tubes, or fuses. Unit must be shipped in the original shipping box(s) and packing material(s). Nace Amps reserves the right to refuse, for warranty, damaged, misused, or modified units. In the event Nace Amps refuses the unit, Nace Amps shall contact the buyer with a quote for repairs. The buyer shall be required to authorize the charges prior to non-warranty service being performed.

     

  • M3-7R SPECS
    • Class “A” 7 watts average 14 watts peak power with a 6V6 power tube.
    • Cathode biased: uses proprietary “phase invariant cathode biasing” which reduces resistor/capacitor cathode biasing phase distortion.
    • Power tubes: EL34, 6L6, or 6V6
    • Pre-amp tubes: 12AT7, 5751, ECC83, 12AX7
    • Controls: volume, treble, bass, reverb
    • Input: ¼ mono
    • Output: ¼ mono – plug into one of three outputs 4, 8, and 16 ohm
    • Reverb on/off 1/4 mono - external switch pedal to turn on or off the reverb
    • Built in power conditioning: proprietary “trans flux power module” which enables the above specifications to be valid for the following input profile: 117vrms +/15%,48 Hz to 1 KHz or from 100VDC to 180VDC. Specifications shall not change over the specified input voltage/frequency range. Ideal for those “out of the way” gigs.
    • Very low noise: better than 60 db (M2-7R) and  70db (M3-7R). Studio/stage quality ideal for miking or recording. 120 Hz amp hum is gone. Note: guitar and pedal hum is a separate issue.
    • 1x12 combo / 1X12 extension speaker: celestion 12” greenback
    • Warranty: One year parts and labor excluding two way shipping, tubes, or fuses. Unit must be shipped in the original shipping box(s) and packing material(s). Nace Amps reserves the right to refuse, for warranty, damaged, misused, or modified units. In the event Nace Amps refuses the unit, Nace Amps shall contact the buyer with a quote for repairs. The buyer shall be required to authorize the charges prior to non-warranty service being performed.
Web Hosting Companies